LaForte® Studio Fabric – 8K

64 inch roll-to-roll dye-sublimation printer for medium to large volume printing

  • speed

    460sqm/h

  • resolution

    1200 dpi

  • print-width
  • print-color

LaForte® Studio Fabric – 8K

Aleph LaForte® Fabric is a large format plotter developed for medium volumes of industrial digital textile printing.

Studio range

A range designed for medium production for direct textile printing on fabric and is based on Aleph LaForte technology to guarantee quality at all stages in printing and can reach a maximum speed of 460sqm/h, according to the selected configuration.

Resolution and print Quality

Reachs the maximum resolution of 1200 dpi with piezoelectric variable drop technology from 4,7,12,18 and up to 60 pico litres, with a precision of progress of under 20 microns.

Automatic alignment

The automatic alignment of the print heads, further perfected and the fastness of the printed substrate guarantee perfect print.

Innovative control software

Innovative cariable drop management software to gurantee uniform printing accentuating the clear, authentic effect and completely avoiding the dithering effect.

Printing Technology  
Printing Method Inkjet variable drop 4pl to 72pl (2,656 nozzies - 2 coluors)
Printing Area 1850/3200 mm
Printing Resolution 300/600/900/1200 dpi
Printable Substrates Fabric
Ink System  
Ink Type Reactive inks, acid dyes, pigments, dye sublimation, dispersed dyes
Colours 4 colours, 6 colours, 8 colours
Capacity 5, 10, 20 litre tanks
Operating Environment Temperature 18 °C ~ 28 °C (64 °F ~ 82 °F), Humidity 40-65%
Speed 48 sqm/h - 460 sqm/h
Interface Ethernet 10 Gb
Water Consumption 50 lt/h
Compressed Air 6 ~ 8 bar
Media Transport System Rotary belt system
Installed Power 16 kVA - 3 phases 380-420V +/- 10% 23A or less
Dimention and Weight 1850 MM Version 4550 L x 2300 D x 1870 H mm - 2,700 Kg
Dimention and Weight 3200 MM Version 5900 L x 2300 D x 1870 H mm - 3,000 Kg
Dimensions and Weight
aleph_studio_dimn
  • Cyan ink cartridge
  • Magenta ink cartridge
  • Yellow ink cartridge
  • High-Density Black ink cartridge
  • kurti
  • kurti
  • sports wear
  • sports wear
  • scarf
  • scarf
  • saree
  • saree
  • bed-sheet
  • bed-sheet
  • table cloth
  • table cloth
  • towel
  • towel
  • curtain
  • curtain
  • POP Display
  • POP Display
  • flags
  • flags
  • back-lit display
  • back-lit display
  • exhibit banner
  • exhibit banner
  • umbrella
  • umbrella
  • automobile interior
  • automobile interior
  • lingeries
  • lingeries
  • foiling
  • foiling
  • key-chains
  • key-chains
  • frames
  • frames
  • bottle
  • bottle
  • phone covers
  • phone covers
  • breeze-brochure

Aleph LaForte® Fabric – 16K Industrial

Aleph LaForte® Fabric is a large format plotter developed for industrial digital textiles printing of large volumes.

  • speed

    920sqm/h

  • resolution

    1200 dpi

  • print-width
  • print-color

ALEPH LAFORTE® FABRIC – 16K INDUSTRIAL

Aleph LaForte® Fabric is a large format plotter developed for industrial digital textiles printing of large volumes.

Maximum yeild

LeForte Fabric has a high production capatiy, being able to reach the maximum speed of 920sqm/h, according to the selected configuration.

Resolution and print quality

Reaches the maximum resolution of 1200 dpi with piezoelectric variable drop technology from 4,7,12,18 and upto 60pico litres, with a precision of progress of under 20 microns.

Automatic alignment

The automatic alignment f the print heads, further perfected and the fastness of the printed substrate gurantee perfect print.

Printing Technology Inkjet variable drop 4pl to 72pl(2,656 nozzles - 2 colours)
Printing Area 1850/2200 mm
Printing Resolution 300/600/900/1200 dpi
Printable Substrates Fabric
Ink System  
Ink Type Reactive inks, acid dyes, pigments, dye sublimation, dispersed dyes
Colours 4 colours, 6 colours, 8 colours
Capacity 5, 10, 20 litre tanks
Operating Environment Temperature 18 °C ~ 28 °C (64 °F ~ 82 °F), Humidity 40-65%
Speed 145 sqm/h - 920 sqm/h
Interface Ethernet 10 Gb
Water Consumption 50 lt/h
Compressed Air 6 ~ 8 bar
Media Transport System Rotary belt system
Installed Power 16 kVA - 3 phases 380-420V +/- 10% 23A or less
Dimention and Weight 1850 MM Version 4550 L x 2300 D x 1870 H mm - 2,800 Kg
Dimention and Weight 3200 MM Version 4900 L x 2300 D x 1870 H mm - 3,000 Kg
Dimensions and Weight
aleph_studio_dimn
  • Cyan ink cartridge
  • Magenta ink cartridge
  • Yellow ink cartridge
  • High-Density Black ink cartridge
  • kurti
  • kurti
  • sports wear
  • sports wear
  • scarf
  • scarf
  • saree
  • saree
  • bed-sheet
  • bed-sheet
  • table cloth
  • table cloth
  • towel
  • towel
  • curtain
  • curtain
  • POP Display
  • POP Display
  • flags
  • flags
  • back-lit display
  • back-lit display
  • exhibit banner
  • exhibit banner
  • umbrella
  • umbrella
  • automobile interior
  • automobile interior
  • lingeries
  • lingeries
  • foiling
  • foiling
  • key-chains
  • key-chains
  • frames
  • frames
  • bottle
  • bottle
  • phone covers
  • phone covers
  • breeze-brochure

DGI-Fabrijet Fd 1904

high speed direct textile printing,sampling & mass production printing

  • speed

    200 m2/hr

  • resolution

    1200 dpi

  • print-width
  • print-color

The DGI FD-1904 Fabrijet Printer is designed for high speed textile printing, sampling and mass production printing. FD 1904 operates at a max speed of 200 m2/hr and delivers a production mode of 115 m2/hr. Used is a Kyocera 2,656 nozzle printhead (4 heads) for excellent durability.

Advantages

  • Kyocera printhead with excellent durability
  • Maximum 140m²/hr productivity
  • Capable of printing variable clothes such as cotton, silk, linen, rayon and polyester
  • High capacity dryer for fast printing
  • Various safety sensors for operators (including obstacle detection, wrinkle detection and Fabric end detection)
Print Heads  Kyocera 300DPI Printhead 4EA (1 head 2 Channel)
Ink DGI Original F220 Ink
Fabrics Cotton, Polyester, Silk and etc
Drop Size 5, 7, 12, 18 pl – Variable dot
Max Print width  1,850mm
Max Fabric width 1,900mm
Print Mode Bi /Uni Direction, Normal / Interleave, Total 36 Printmodes
Interface PC Integrated
Resolution(DPI)) Max 1,200DPI
Rip Software Wasatch TX, Inedit(Driver), Ergosoft(Driver)
Color 8 Colors (Yellow, Magenta, Cyan, Black, Blue, Red, Orange, Gray)
Operating Environment Temperature : 20~28℃,Humidity : 40~70%
Electric Power Printer : Single phase 220V (50/60hz, AC) / 10A
  Dryer : Single phase 220V (50/60hz, AC) / 40A
Pressured Air Min 5kgf/cm²
Size Uncrated : 4,420mm(L) x 2,080mm(W) x 1,650mm(H)
  Crated : 5,800mm(L) x 1,660mm(W) x 2,100mm(H)
Weight Uncrated : 1,770Kg Crated : 2,520Kg
 Main Scan(DPI)ModeSub Scan(DPI)Speed(m²/h)Pass
Print Speeds 600 Normal 300 200 1
600 115 2
900 80 3
1200 62 4
Interleave I 300 138 2
600 76 4
900 53 6
1200 40 8
Interleave II 300 147 1
600 80 2
900 55 3
1200 41 4

Black Horse-INK

  • Cyan ink cartridge
  • Magenta ink cartridge
  • Yellow ink cartridge
  • Black ink cartridge
  • blue ink cartridge
  • red ink cartridge
  • orange ink cartridge
  • gray ink cartridge
  • sports wear
  • sports wear
  • scarf
  • leggings
  • scarf
  • scarf
  • saree
  • saree
  • bed-sheet
  • bed-sheet
  • table cloth
  • table cloth
  • towel
  • towel
  • curtain
  • curtain
  • POP Display
  • POP Display
  •  back-lit display
  • back-lit display
  • drop display
  • drop display
  •  flags
  • flags
  • umbrella
  • umbrella
  • canvas
  • canvas
  • lingeries
  • lingeries
  • foiling
  • foiling
  • mouse pad
  • mouse pad
  • clock
  • clock
  • laptop covers
  • laptop covers
  • bag
  • bag
  • Fabrijet-fd-1904-brochure

DGI-Fabrijet Fd 1908

Direct Textile Printer capable of 100 linear m/hr

  • speed

    200 m2/hr

  • resolution

    1800 dpi

  • print-width
  • print-color

The DGI FD-1908 Fabrijet Printer is designed for high speed textile printing, mass production printing capable of achieving 100 linear metres per hour. FD 1908 delivers a speed of 200 m2/hr with a max print width of 1,850 mm and a max media width of 1,900mm. Used is a Kyocera printhead (8 heads) for excellent durability.

Advantages

  • Kyocera printhead with excellent durability
  • Maximum 200m²/hr productivity
  • Capable of printing variable clothes such as cotton, silk, linen, rayon and polyester
  • High capacity dryer for fast printing
  • Various safety sensors for operators (including obstacle detection, wrinkle detection and Fabric end detection)
Print Heads  Kyocera 600DPI Printhead 8EA
Ink DGI Original F220 Ink
Fabrics Cotton, Polyester, Silk and etc
Drop Size 5, 7, 12, 18 pl – Variable dot
Max Print width  1,850mm
Max Fabric width 1,900mm
Print Mode Bi / Uni Direction, Normal/ Interleave/ Purge
Interface TCP/IP
Resolution(DPI)) Max 1,800DPI
Rip Software Wasatch TX, Inedit(Driver), Ergosoft(Driver)
Color 8 Colors (Yellow, Magenta, Cyan, Black, Blue, Red, Orange, Gray)
Operating Environment Temperature : 20~28℃,Humidity : 40~70%
Electric Power Printer & Winder : Single phase 220V (50/60hz, AC) / 11A
  Dryer : Three phase 380V (50/60hz, AC) / 25A
Pressured Air Min 5kgf/cm²
Size Printer - Uncrated : 4,410mm(L) x 1,820mm(W) x 1,670mm(H)
  Crated : 4,700mm(L) x 2,000mm(W) x 2,150mm(H)
  Dryer - Uncrated : 2,840mm(L) x 1,875mm(W) x 1,420mm(H)
  Crated : 3,100mm(L) x 1,970mm(W) x 1,650mm(H)
  Winder - Uncrated : 2,860mm(L) x 730mm(W) x 1,050mm(H)
  Crated : 3,100mm(L) x 1,060mm(W) x 1,600mm(H)
Weight Printer - Uncrated : 1,630Kg  Crated : 2,400Kg
  Dryer - Uncrated : 440Kg  Crated : 600Kg
  Winder - Uncrated : 145Kg Crated : 250Kg
 Main Scan(DPI)ModeSub Scan(DPI)Speed(m²/h)Pass
Print Speeds 600 Normal 600 200 1
1200 110 2
1800 75 3
Interleave I 600 125 2
1200 67 4
1800 45 6
Interleave II 600 140 1
1200 72 2
1800 65 3

Black Horse-INK

  • Cyan ink cartridge
  • Magenta ink cartridge
  • Yellow ink cartridge
  • Black ink cartridge
  • blue ink cartridge
  • red ink cartridge
  • orange ink cartridge
  • gray ink cartridge
  • T-shirt
  • T-shirt
  • kurti
  • kurti
  • scarf
  • leggings
  • scarf
  • scarf
  • bed-sheet
  • bed-sheet
  • sofa cover
  • sofa cover
  •  cushion cover
  • cushion cover
  • curtain
  • curtain
  • POP Display
  • POP Display
  •  back-lit display
  • back-lit display
  • indoor display
  • indoor display
  •  exhibit banner
  • exhibit banner
  • umbrella
  • umbrella
  • tents
  • tents
  • footwear
  • footwear
  • canvas
  • canvas
  • mouse pad
  • mouse pad
  • clock
  • clock
  • cap
  • cap
  • frames
  • frames
  • Fabrijet-fd-1908-brochure

Inedit Software

Inedit SoftRip TXProfessional RIP and Print management software that can be used with the main printers in the market. Thanks to its user-friendly interfaces you will be able to manage any demand. Work with fluorine ink, white ink or simply manage your printer inks to your taste with the Binomial between neoStampa7 and neoTextil of Inedit Software. Complete control with all the possibilities at your grasp.

  • The unique color management engine of neoStampa connects different inks, combinations, media and printers into the same profile pool.
  • neoStampa manages process color and spot ink combinations with up to 16 colors, including essential textile inks such as Golden Yellow, Orange, Red, Blue, Gray, etc..
  • The color accuracy of neoStampa is unmatched due to the premodeled RGB-to-Multicolor architecture.
  • The intuitive and flexible cost control interface shows the actual ink and media consumption of the printed jobs in the complete printing mill.
  • The state-of-the-art ICC profiling engine uses best gamut mapping technology to assure that even small printer color spaces reproduce large (synthetic) photographic sources. ColorBoost technology to improve saturation and brilliance while preserving color accuracy and gradients!
  • Print a fabric roll without gaps. The seamless step&repeating function of neoStampa facilitates the handing of classical textile designs that are prepared for all over, endless repeating printing.
closeicon
Sales Inquiry
loading